Basic Info.
Type
Concrete Mixing Truck
Certification
ISO9001: 2000, CE
Transport Package
Nude Packing
Specification
7300x2650x3750mm
Product Description
Mode MODEL CMT2000R
SELF LOADING CONCRETE MIXER TRUCK (2.0 CBM)
Product Introduction
Model CMT2000R Self Loading Concrete Mixer Truck is a kind of unique vehicle which combines concrete mixer, transit mixer and wheel loader. The concrete output ability is 8 cube meters per hour. The wheel-side reducer driving axle and full hydraulic transmission case make the mixer truck move in any kinds of complex off road ways, the max. moving speed can be up to 25 km/hour, and the min. turning radius is 5.2 meters only.
CMT2000R is equipped with driving camera, automatic water feeding & metering system, electronic water suction pump, etc. The mixing drum can be slewed hydraulically through 270 degrees for high discharge over 1.8m on the four sides of the vehicle. The drum can also be lifted up 20° by two hydraulic cylinders at bottom for the convenience of concrete discharge.
The vehicle size is small, which is suitable for limited site and widely used in new rural construction, urban construction, tunnel, airport, seaport, high-speed rail site, remote areas where there are no electric power, middle projects, farmer's houses, building, country road, irrigation, reservoir, mine, rural bridges, high-way road etc, which characterized in saving labors, high efficiency concrete output.High strength steel plate, which enhances the load capacity and high stability of vehicle.The material of rolling ring and mixing drum adopts 16mn high strength steel which uses forging normalizing manufacturing process. Mixing blade is designed with varying pitching angles, which simplifies the feeding device, ensures the speed faster and mixing performance better.
| Mixing unit |
| Double-cone drum with double spiral mixing screw, mixing blade and convex bottom |
| Geometrical drum volume | 2.8 M3 |
| Concrete output | 2 M3 / batch, 8 M3 / hour |
| Drum rotation speed | 13 rpm |
| Features | Drum is rotated by means of dual gear pump and hydraulic cycloid motor in open circuit. Mixing and discharging speed is independent from rpm of diesel engine. The discharging process is achieved by reversing operation of drum. The mixing drum can be slewed hydraulically through 270 degrees for high discharge over 1.8m on the four sides of the vehicle. The drum can also be lifted up 20° by two hydraulic cylinders at bottom for the convenience of concrete discharge. |
| Engine |
| Model | YUCHAI, YCD 4T22T-105, Turbo Charged and Water Cooled
(4-Cylinder) | Optional:
Dongfeng Cummins (75KW)
or USA Cummins (82KW) |
| Rated power | 78 KW (106HP) @ 2400 rpm
Max Torque: 330 N.M @2000 rpm |
| Mounting position | Engine is mounted transversally on the rear. |
| Emission standard | Euro II |
| Transmission |
| Model | Hydrostatic "automotive" transmission with gear pump and hydraulic motor with hydraulic control, and reverse gear control on the steering wheel. It is a kind of 4 wheel drive and articulated steering. |
| Gear | Automatic, 4F+ 4R shift |
| Axles | Small size wheel-side reducer driving axle, with oil bath disk brakes and planetary reducers |
| Speed | 4F+4R shift |
| 1st: 0-3.0km/h; 0-3.0km/h |
| 2nd: 0-7.2km/h; 0-3.0km/h |
| 3rd: 0-10.0km/h; 0-10.0km/h |
| 4th: 0-25.0km/h; 0-10.0km/h |
| Cabin | The ROPS & FOPS type closed front cab is suited on side of loading shovel. Electric fan, tilting front window and anatomic seat with flexible suspension are available. A/C is optional upon request. |
| Joymix | The function of drum mixing and arm lifting are controlled by one hydraulic joystick, and functions of drum revolving and lifting are controlled by another hydraulic joystick. |
| Weighing | Chinese brand electronic weighing system is optional upon request. The "loading cells" are acting on the drum, and technical data are displayed on the shovel loader weigher inside the cabin. |
| Loading shovel |
| It is fitted with serrated blade in the front and completed with hydraulic opening gate. The lifting arms are controlled by double-acting hydraulic cylinders. |
| Volumetric capacity | 500L |
| Number of shovel loading times of full drum | Around 4 times |
| Chute | Could be mechanically tilted and slewed at 90 degree by means of one adjustable handle. 2 pcs. of discharging chute extensions are provided as standard accessories. |
| Water system |
| Features | Self-priming electric water pump with quick-suction. |
| Max. capacity | 250 L/min. |
| Water tank | Two connected steel tanks are positioned opposite, with a total capacity of 2 x 200 L. |
| Gradient | Fully loaded 40% |
| Brakes | Air cap oil service brake. Internal oil-bath disc service acting on the 4 wheels. Negative hydraulic parking brake, with internal wheel hub discs on the front axle. |
| Tyres | Off road steel cord type, 20.5/70-16 |
| Steering | Hydrostatic articulated system steering |
| Mini. Turning radius: 5200mm |
| Electric system |
| Alternator | 24V-1500W |
| Battery: | 2x12V-80AH |
| For electric starter and road lighting, safety battery cut-off |
| Service refill capacities |
| Fuel tank: | 63L |
| Total hydraulic system capacity: | 63L |
| Engine oil: | 16L |
| Chassis | Articulated chassis for off-road operation |
| Whole truck parameters |
| Overall dimensions (L×W×H) | 7300 mm × 2650 mm × 2750 mm (3750 mm full height) |
| Wheelbase | 2600 mm |
| Tread | 1510 mm |
| Whole truck no-load weight | 5,600 Kg |
| Load-carrying capacity | 4,800 Kg |
| Max. gross weight | 10,400 Kg |
| Drive type | Torque converter |
| Top speed | 25 km/h |
| Max. climbing degree | 40° |
| Min. turning radius | 5200 mm |
| Hydraulic system |
| Dual gear pump for drum mixing and arm lifting | Flow rate: 50/32 ml/r |
| Walking gear pump for driving | Flow rate 20 ml/r |
| Hydraulic cycloid motor | Flow rate 125 ml/r |
| Characters: |
Save five labors everyday
Save electricity 100 KWH without using agitator.
Save concrete transportation truck
Save wheel loader to fill in material
High resolution camera without blind area, ensure the steering safety. |
Optional accessories:
Dongfeng Cummins engineUSA Cummins engineElectronic Weighing device Centralized greasing systemHydraulic water pumpAir conditioner in cabin
Note:
The above parameters are possible to change due to design improvement, so the parameters of your ordered machine may be different with the above information. Please accept it without advance notification for the parameters improvement.
Section detail:
Overall dimensions:
Our advantages:
Our self-loading concrete mixer truck works through a brutal test of Chinese construction sites, and we have full confidence in our machines to be with best quality and high efficiency. We believe that our mixer truck could produce more and better concrete for you.
Our services:
Warranty: one year
Company brief introduction:
Laizhou Jufeng Machinery Co., Ltd. is the leading manufacturer specializing in construction machinery and equipment in China. Founded in 1992, our company has grown to be group enterprise which covers an area of more than 200,000 square meters and owns over 600 employees and 5 production plants.
The main products we manufacture include Self Loading Concrete Mixer with output capacity ranging from 0.8 CBM to 6.5 CBM, Wheel Loader with payload from 1 Ton to 3 Ton, Backhoe Loader, Site Dumper, Crawler Excavator, Concrete Mixer Pump, Concrete Boom Pump, Block Making Machine and Compaction Machine, etc.
We have constantly improved and updated our products according to customer's feedback and market demand. At every stage of the manufacturing process, each component has passed the stringent tests before the assembled machinery goes through its final pre-despatching inspection. Excellent quality, efficient after-sales service and reasonable price make us gain customer's trust and good reputation in both domestic and overseas markets. Our products have been exported to Russia, Uzbekistan, Mongolia, Malaysia, Philippines, Middle East, Kenya, Uganda, Algeria and Australia, etc.
In accordance with the development strategy of "Make ZKJF as a Brand with One Hundred Year's History", we endeavor to head towards of our great goal of be first-class enterprise in mainland China and well-known engineering machinery manufacturer in the worldwide as well.
Contact information:
Company Name: Laizhou Jufeng Machinery Co., Ltd.
Contact Person: Jerry Lee
Position: Director of Foreign Trade
Tel: +86-15098557112
Web Site: http://jfmixer.en.made-in-china.com
Address: Tushan Industrial Park, Laizhou City, Shandong Province, China 261400
Contact Person: James Yang
Position: Director of Foreign Trade
Tel: +86-15098557232
Web Site: http://jfmixer.en.made-in-china.com
Address: Tushan Industrial Park, Laizhou City, Shandong Province, China 261400
Address:
Shahe Town Industrial Park, Laizhou, Shandong Province, Chi
Na, Yantai, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware, Transportation
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of " Quality first, customer first and credit-based" Since the establishment of the company and always do our best to satisfy potential needsof our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}