Basic Info.
Certification
ISO9000, CCC, CE
Transmission Type
Hydraulic
Transport Package
Nude Packing in Container
Specification
7830mmx2680 mmx3300mm (4170 mm full height)
Product Description
MODEL CMT3500R
SELF LOADING CONCRETE MIXER TRUCK (3.5 CBM)
Product Introduction
Model CMT3500R Self Loading Concrete Mixer Truck is a kind of unique vehicle which combines concrete mixer, transit mixer and wheel loader. The concrete output ability is 14 cube meters per hour. The outsize wheel-side reducer driving axle and full hydraulic transmission case make the mixer truck move in any kinds of complex off road ways, the max. moving speed can be up to 25 km/hour, and the min. turning radius is 5.3 meters only.
CMT3500R is equipped with driving camera, automatic water feeding & metering system, hydraulic water suction pump, and cooling & heating air conditioner, etc. The mixing drum can be slewed hydraulically through 270 degrees for high discharge over 2.0m on the four sides of the vehicle. The drum can also be lifted up 20 degrees from the bottom by two hydraulic cylinders for the convenience of concrete discharge.
l The vehicle size is small, which is suitable for limited site and widely used in new rural construction, urban construction, tunnel, airport, seaport, high-speed rail site, remote areas where there are no electric power, middle projects, farmer's houses, building, country road, irrigation, reservoir, mine, rural bridges, high-way road etc, which characterized in saving labors, high efficiency concrete output.
l High strength steel plate, which enhances the load capacity and high stability of vehicle.
l The material of rolling ring and mixing drum adopts 16mn high strength steel which uses forging normalizing manufacturing process.
l Mixing blade is designed with varying pitching angles, which simplifies the feeding device, ensures the speed faster and mixing performance better.
Mixing unit |
Double-cone drum with double spiral mixing screw, mixing blade and convex bottom |
Geometrical drum volume | 5.3 M3 |
Concrete output | 3.5 M3 / batch, 14 M3 / hour |
Drum rotation speed | 20 rpm |
Features | Drum is rotated by means of dual gear pump and hydraulic piston motor in closed circuit. Mixing and discharging speed is independent from rpm of diesel engine. The discharging process is achieved by reversing operation of drum. The mixing drum can be slewed hydraulically through 270 degrees for high discharge over 2.0m on the four sides of the vehicle. The drum can also be lifted up 20 degrees from the bottom by two hydraulic cylinders for the convenience of concrete discharge. |
Engine |
Model | YUCHAI, YCD 4J22G, Turbo Charged and Water Cooled (4-Cylinder) | Optional: Dongfeng Cummins (4BTA3.9-C130, 97kw) |
Rated power | 85 KW (116HP) @ 2400 rpm Max Torque: 390 N.M @2000 rpm |
Mounting position | Engine is mounted transversally on the rear. |
Emission standard | Euro II |
Transmission |
Model | Hydrostatic "automotive" transmission with gear pump and hydraulic motor with hydraulic control, and reverse gear control on the steering wheel. It is a kind of 4 wheel drive and articulated steering. |
Gear | Automatic, 4F+ 4R shift |
Axles | Outsize wheel-side reducer driving axle, with oil bath disk brakes and planetary reducers |
Speed | 4F+4R shift |
1st: 0-3.0km/h; 0-3.0km/h |
2nd: 0-7.2km/h; 0-3.0km/h |
3rd: 0-10.0km/h; 0-10.0km/h |
4th: 0-25.0km/h; 0-10.0km/h |
Cabin | The ROPS & FOPS type closed front cab is suited on side of loading shovel. Air conditioner, tilting front window and anatomic seat with flexible suspension are available. |
Joymix | The function of drum mixing and arm lifting are controlled by one hydraulic joystick, and functions of drum revolving and lifting are controlled by another hydraulic joystick. |
Weighing | Chinese brand electronic weighing system is optional upon request. The "loading cells" are acting on the drum, and technical data are displayed on the shovel loader weigher inside the cabin. |
Loading shovel |
It is fitted with serrated blade in the front and completed with hydraulic opening gate. The lifting arms are controlled by double-acting hydraulic cylinders. |
Volumetric capacity | 600L |
Number of shovel loading times of full drum | Around 6 times |
Chute | Could be mechanically tilted and slewed at 90 degree by means of one adjustable handle. 2 pcs. of discharging chute extensions are provided as standard accessories. |
Water system |
Features | Self-priming hydraulic driven water pump with quick-suction. |
Max. capacity | 550 L/min. |
Water tank | Two connected steel tanks are positioned opposite, with a total capacity of 2 x 310 L. |
Gradient | Fully loaded 40% |
Brakes | Air cap oil service brake. Internal oil-bath disc service acting on the 4 wheels. Negative hydraulic parking brake, with internal wheel hub discs on the front axle. |
Tyres | Off road industrial type, 16/70-20, PR14 |
Steering | Hydrostatic articulated system steering |
Mini. Turning radius: 5300mm |
Electric system |
Alternator | 24V-1500W |
Battery: | 2x12V-80AH |
For electric starter and road lighting, safety battery cut-off |
Service refill capacities |
Fuel tank: | 75L |
Total hydraulic system capacity: | 75L |
Engine oil: | 16L |
Chassis | Articulated chassis for off-road operation |
Whole truck parameters |
Overall dimensions (L×W×H) | 7830 mm × 2680 mm × 3300 mm (4170 mm full height) |
Wheelbase | 2900 mm |
Tread | 1820 mm |
Whole truck no-load weight | 7,200 Kg |
Load-carrying capacity | 8,400 Kg |
Max. gross weight | 15,600 Kg |
Drive type | Torque converter |
Top speed | 25 km/h |
Max. climbing degree | 40° |
Min. turning radius | 5300 mm |
Hydraulic system |
Dual gear pump for drum mixing and arm lifting | Flow rate: 80/40 ml/r |
Walking gear pump for driving | Flow rate 32 ml/r |
Hydraulic piston motor | Flow rate 160 ml/r |
Characters: |
Save five labors everyday Save electricity 100 KWH without using agitator. Save concrete transportation truck Save wheel loader to fill in material High resolution camera without blind area, ensure the steering safety. |
Optional accessories:
l Dongfeng Cummins engine
l USA Cummins engine
l Electronic Weighing device
l Centralized greasing system
Note:
The above parameters are possible to change due to design improvement, so the parameters of your ordered machine may be different with the above information. Please accept it without advance notification for the parameters improvement.
Section detail:
Overall dimensions:
Our advantages:
Our self-loading concrete mixer truck works through a brutal test of Chinese construction sites, and we have full confidence in our machines to be with best quality and high efficiency. We believe that our mixer truck could produce more and better concrete for you.
Our services:
Warranty: one year
Company brief introduction:
Laizhou Jufeng Machinery Co., Ltd. is the leading manufacturer specializing in construction machinery and equipment in China. Founded in 1992, our company has grown to be group enterprise which covers an area of more than 200,000 square meters and owns over 600 employees and 5 production plants.
The main products we manufacture include Self Loading Concrete Mixer with output capacity ranging from 0.8 CBM to 6.5 CBM, Wheel Loader with payload from 1 Ton to 3 Ton, Backhoe Loader, Site Dumper, Crawler Excavator, Concrete Mixer Pump, Concrete Boom Pump, Block Making Machine and Compaction Machine, etc.
The company has passed the approval of ISO9001 for its quality control system, and most of our products have passed the CE authentication. We have constantly improved and updated our products according to customer's feedback and market demand. At every stage of the manufacturing process, each component has passed the stringent tests before the assembled machinery goes through its final pre-despatching inspection. Excellent quality, efficient after-sales service and reasonable price make us gain customer's trust and good reputation in both domestic and overseas markets. Our products have been exported to Russia, Uzbekistan, Mongolia, Malaysia, Philippines, Middle East, Kenya, Uganda, Algeria and Australia, etc.
In accordance with the development strategy of "Make ZKJF as a Brand with One Hundred Year's History", we endeavor to head towards of our great goal of be first-class enterprise in mainland China and well-known engineering machinery manufacturer in the worldwide as well.
Contact information:
Company Name: Laizhou Jufeng Machinery Co., Ltd.
Contact Person: Jerry Lee
Position: Director of Foreign Trade
Tel: +86-15098557112
Web Site: http://jfmixer.en.made-in-china.com
Address: Tushan Industrial Park, Laizhou City, Shandong Province, China 261400
Contact Person: James Yang
Position: Director of Foreign Trade
Tel: +86-15098557232
Web Site: http://jfmixer.en.made-in-china.com
Address: Tushan Industrial Park, Laizhou City, Shandong Province, China 261400
Address:
Shahe Town Industrial Park, Laizhou, Shandong Province, Chi
Na, Yantai, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware, Transportation
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of " Quality first, customer first and credit-based" Since the establishment of the company and always do our best to satisfy potential needsof our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}